User Manual

August 6, 2003 Part 004071A revision 00b 113
Chapter 4: Installation Procedures
See the documentation that comes with your analyzer for information about
performing the cable sweep and interpreting the results.
6 Record the results from the cable sweeps according to the MOPs of your site.
Keeping records of periodic cable sweeps makes troubleshooting future problems
easier.
7 Carefully disconnect the analyzer from the RF equipment.
8 Reconnect the RF equipment and cables back to the RFSS module.
9 If any of the connectors are outdoors, ensure that they are resealed according to
the procedures of your site.
10 Reconnect the RF equipment to the RFSS module.
11 Power on the RFSS module. See page 116 for a list of circuit breakers.
installation.book Page 113 Wednesday, August 6, 2003 6:06 PM