Installation Manual

August 23, 2006 Revision 00b-DRAFT 37
Chapter 5: Antenna Installation Procedures
Figure 5.1 RF Antenna Configuration
Back of Radio
Modules
Antenna BTS Antenna BTS
CINs
Ground
TT-LNA TT-LNA
Feeds (hard line)
7/16 DIN(F)
Main Diversity
Antennas use
7/16 DIN(M) connectors
(MMDS antennas may
use N-type connectors)
TT-LNAs use
7/16(M) connectors
for all ports
Demarcation point of shelter
1/2-inch superflex
Jumper (4 feet)
Red is Main Run
Blue is Diversity Run
On additional runs (that is, the cabling for additional sectors),
label antenna cables with additional red or blue tape.
For example, the cabling for sector 2 would use two red
stripes for main and two blue stripes for diversity.