User's Manual

32
Booster Antenna Installation Guide
Running cable to the SOMAport
When routing cable to the SOMAport, you should select the shortest possible
path and always protect the cable from physical damage. Depending on the
installation site, you could run the cable through a floor or wall, or directly to the
rear of the SOMAport. If the cable goes straight through a wall, you can use a
wall plate at the access point.
The SOMAport
The following diagram shows the location of the booster antenna connector on
the back panel of the SOMAport. It also indicates the location of the LEDs on
the front panel. These LEDs should be checked once the booster antenna has
been connected and the SOMAport turned on to ensure that the SOMAport is
functional.
00303
Serial Port
(RS-232)
USB Port
(Series B)
Ethernet Port
(RJ-45)
Power Switch
Power Connector
Telephone Jack
(RJ-11)
Booster Antenna
Connector
Telephone Jack
(RJ-11)
Back Panel
Status Light
Received Signal
Strength Indicator
Lights
Front Panel