User's Manual

28
Booster Antenna Installation Guide
Attaching the booster antenna to the mounting
assembly
Once the mounting bracket and pipe assembly are securely attached to the
mounting surface and the mounting pipe is pointing straight up, you are ready to
attach the booster antenna in its housing to the mounting assembly.

To attach the booster antenna
1
Attach the booster antenna to the mounting pipe.
i
QUESTION: WHAT ARE THE STEPS TO DO THIS?
2
Attach the ground wire to the booster antenna.
i
Insert a #10 screw into the hole close to the RF cable connection.
ii
Slide a #10 flat washer over the screw.
iii
Slide a #10 lock washer over the screw.
iv
Tighten the screw.
INSERT Diagram showing where the wire is attached.
QUESTION: Where is the wire attached?