User's Manual

21
You will see the following message at the beginning of the installation:
The software you are installing for this hardware:
SOMAport USB (SOMAport.SYS)
has not passed Windows Logo testing to verify its
compatibility with Windows.
Click Continue Anyway. The drivers have passed stringent internal testing by
SOMA Networks, Inc.
4 Follow the on-screen instructions in the wizard, making sure you select the
values indicated in the following table for your version of Windows.
5 Close the wizard windows and remove the CD from the drive. If prompted to
do so, reboot your computer.
Version Selections
Windows 98
When prompted for the type of search, select Search
for the best driver for your device.
When prompted for a location, insert the SOMAport
USB Drivers CD into the computer and then select CD-
ROM drive.
Insert the Windows 98 Second Edition CD if prompted.
Windows 2000
When prompted for the type of search, select Search
for a suitable driver for your device.
When prompted for a location, insert the SOMAport
USB Drivers CD into the computer and then select CD-
ROM drive.
Windows ME
When prompted for the type of search, select Specify a
location.
When prompted for a location, insert the SOMAport
USB Drivers CD into the computer and then select
Removable Media.
Windows XP
When prompted for the type of search, insert the
SOMAport USB Drivers CD into the computer and then
select Install the software automatically.
sp3.book Page 21 Tuesday, March 28, 2006 5:09 PM