User Manual
Table Of Contents
- Introduction
- Installing the SOMAport
- Installing the SOMAport and Connecting Equipment
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting the power supply and powering on the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Activating service
- Changing Ethernet Network Settings
- Installing the SOMAport and Connecting Equipment
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
76
SOMAport Setup Guide
Internet Explorer LAN settings are incorrect
If you are using Internet Explorer as your Web browser, make sure the LAN
settings are properly configured. By default, Internet Explorer is configured to
automatically detect settings. However, if this option has been disabled, you will
not be able to connect to the Internet.
To check Internet Explorer settings
1
Open Internet Explorer.
2
Choose Tools→Internet Options.
The Internet Options window opens.
3
Click the Connections tab.
4
Click LAN Settings.
The Local Area Network (LAN) Settings window opens.
5
Make sure the
Automatically detect settings
checkbox is enabled.
6
Click OK.
7
Click OK on the Internet Options window.
8
Close Internet Explorer.