User Manual
Table Of Contents
- Introduction
- Installing the SOMAport
- Installing the SOMAport and Connecting Equipment
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting the power supply and powering on the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Activating service
- Changing Ethernet Network Settings
- Installing the SOMAport and Connecting Equipment
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
69
Troubleshooting and Getting Help
The SOMAport is not getting power
If the light on the power supply and the status light on the SOMAport are off,
the SOMAport is not getting power. Try each of the actions in the following
procedure until you locate the source of the problem.
To check the power
1
Make sure the SOMAport is plugged in.
2
Make sure the power cord that connects the power supply to the wall outlet is
securely connected to the power supply and the wall outlet.
3
Make sure the power cord that connects the power supply to the SOMAport is
securely connected to the power jack on the back of the SOMAport.
4
Make sure the wall receptacle is working by plugging in an appliance that you
know works.
5
Check the circuit breaker.
6
If you cannot find the source of the problem, call your wireless service provider.