User Manual

42
SOMAport Setup Guide
8
Click Finish.
9
Restart your computer.
NOTE:
Do not skip this step.
10
Check your Internet connection.
See “Activating service” on page 39.

To change network settings in Windows 95
1
Select Start→Settings→Control Panel.
2
Double-click the Network icon.
The Network window opens to the Configuration tab.
3
Select TCP/IP.

If multiple TCP/IP connections are listed, select the one that contains
“Ethernet”, “NIC”, or “10/100 MB” in its name. Go to step 5.

If TCP/IP is not listed, go to step 4.
4
Install TCP/IP:
i
Click Add.
The Select Network Component Type window opens.
ii
Select
Protocol
from the list.
iii
Click Add.
The Select Network Protocol window opens.
iv
Select Microsoft from the Manufacturers list.
v
Select TCP/IP from the Network Protocols list.
vi
Click OK.
vii
Insert the Windows 95 CD or reboot the computer if prompted to do so.
viii
If the PC reboots, repeat steps 1 to 3, then go to step 5.
5
Check the TCP/IP properties:
i
Click Properties.
The TCP/IP Properties window opens to the IP Address tab.
ii
Make sure the
Obtain an IP address automatically
radio button is enabled.
iii
Click the DNS Configuration tab.
iv
Enable the Disable DNS radio button.