User Manual

41
Installing the SOMAport
Changing network settings in Windows 95
Change your computer’s network settings if you could not get an Internet
connection after connecting your computer to the SOMAport.
The procedure you follow depends on whether or not your PC has previously
been set up for a dial-up Internet connection. Choose one of the following
procedures:
 If the PC has not previously been set up for a dial-up connection, you can
use the Internet Connection Wizard. See “To run the Internet Connection
Wizard in Windows 95” below.
 If the PC has been previously set up for a dial-up connection, the Internet
Connection Wizard will not work and you must manually change the
network settings. See “To change network settings in Windows 95” on page
42.

To run the Internet Connection Wizard in Windows 95
1
Choose Start→Programs→Accessories→Internet Tools→Get on the Internet.
The Get Connected window opens.
NOTE:
If your version of Windows 95 does not have this option, follow the
procedure “To change network settings in Windows 95” on page 42.
2
Click Next.
The Setup Options window opens.
3
Enable the Manual radio button and click Next.
The Welcome to Internet Setup window opens.
4
Click Next.
5
Enable the Connect using my Local Area Network radio button and click
Next.
The Internet Mail window opens.
6
Make sure the Use Internet Mail checkbox is disabled and click Next.
The Proxy Server window opens.
7
Make sure the Use Proxy Server checkbox is disabled and click Next.
The Complete Configuration window opens.