User Manual
Table Of Contents
- Introduction
- Installing the SOMAport
- Installing the SOMAport and Connecting Equipment
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting the power supply and powering on the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Activating service
- Changing Ethernet Network Settings
- Installing the SOMAport and Connecting Equipment
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
14
SOMAport Setup Guide
The front panel
There are five lights on the front panel of the SOMAport. These lights indicate
the state of the SOMAport. Their locations are shown below.
Lights
The lights have the following functions.
See the chapter “SOMAport Lights” on page 57 for information about reading
the lights.
00076
Status Light
Signal Strength
Indicator Lights
Light Description
Status The top light is the status light. It indicates whether or not the SOMAport is receiving
power and functioning normally.
Signal Strength
Indicator
The group of four lights below the status light report on the strength of the radio
signal.