User Manual
Table Of Contents
- Introduction
- Installing the SOMAport
- Installing the SOMAport and Connecting Equipment
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting the power supply and powering on the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Activating service
- Changing Ethernet Network Settings
- Installing the SOMAport and Connecting Equipment
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
13
Introduction
Radio spectrum
The SOMAport supports various bands of radio spectrum from 1.8–2.7 GHz.
Routine maintenance
The SOMAport does not require maintenance or servicing other than
occasionally cleaning the outside of the unit. Follow these guidelines:
Wipe the unit down with a dry cloth periodically.
Do not use cleaners, solvents, or water.
If you spill liquid inside the SOMAport, unplug it, and call your wireless service
provider.
Other documents
Once you have installed the SOMAport using this guide, you may need to refer
to one or more of the following documents.
SAU Installation Guide – This document is shipped with the optional
SOMAport Accessory Unit (SAU). It describes how to install the SAU
outdoors, ground it, and connect it to the SOMAport.
Services documentation – The SOMAport Setup Guide does not describe
how to use telephone and Internet services. Contact your wireless service
provider for information.