User Manual

Proprietary and Confidential
31
Installing the SOMAport 140
Connecting telephone equipment to in-building telephone wiring
b
Insert the other end of the cable into the Line 2 jack (the one on the right if you
have a 2-jack splitter, or the one in the middle if you have a 3-jack splitter).
5
Connect other phone equipment, located in other rooms, to the SOMAport 140
using the in-building wiring.
a
Insert a two-line splitter into each wall phone jack that will be used to connect
telephone equipment to the SOMAport 140.
b
Insert the device’s RJ-11 cable into the Line 2 jack (the one on the right if you
have a 2-jack splitter, or the one in the middle if you have a 3-jack splitter).
6
Connect any other equipment to the SOMAport 140 using the proper
procedures.
00100