User Manual

Proprietary and Confidential
21
Installing the SOMAport 140
Installing the power supply
Installing the power supply
The SOMAport 140 uses an external desktop power supply or an
uninterruptible power supply (UPS). Instructions for installing the UPS are in
the Uninterruptible Power Supply Quick Reference Card that is packaged with
the UPS.

To install the power supply
1
Insert the power supply’s two-pin barrel connector into the power jack on the
back of the SOMAport 140.
2
Insert the power cord’s 3-prong female socket into the power supply’s
receptacle.
3
Insert the plug end of the power cord into the grounded power outlet.
WARNING:
Use only the power supply and power cord that were
shipped with the SOMAport 140. Using a different power supply may
damage your equipment and poses the risk of shock or electrocution.
WARNING:
To prevent electric shock, match the wide blade of the
plug to the wide slot in the outlet and fully insert it.