User Manual
Proprietary and Confidential
13
Introduction
The front panel
The front panel
There are five light-emitting diodes (LEDs) on the front panel of the
SOMAport 140. These are status lights that indicate the state of the SOMAport
140. Their locations are shown below.
LEDs
The LEDs have the following functions.
See the chapter “Maintaining the SOMAport 140” on page 39 for information
about reading LEDs.
LED Description
1 The first LED is the Status LED. It indicates whether or not the SOMAport 140
is receiving power and functioning normally.
2 - 5 LEDs 2 through 5 make up the signal strength indicator. Together, these LEDs
indicate how strong the signal is.