Technical Specifications

SOLYX, UltraSafe ® and SimGlas are trademarks of Decorative Films, LLC. © 2015 Decorative Films, LLC. All rights reserved.
Specification Sheet
Solyx
®
Glass Finishes - UltraSafe: 4 Mil Clear
Image is only representative
Product Description
SOLYX UltraSafe 4Mil is a premium grade safety and security
polyester film with a scratch resistant coating and pressure sensitive
adhesive.
Specifications
Product Code
UltraSafe 4
Product Family
UltraBlock
Film Type
Polyester
Adhesive Type
Pressure-sensitive
Usage
Interior
ROLL SIZE
36” x 84”
Thickness
4 mil
SOLAR PROPERTIES:
Reflectance
10%
Visible Light Transmission
93%
UV Transmission
15%
Total Solar Reflectance
8%
Total Solar Absorbance
15%
PHYSICAL PROPERTIES
Tensile Strength psi
32,500
Yield Strength psi
12,000
Break Strength lbs/inch TD/MD
182/217
Longitude Elongation at Break
>100%
Peel Strength g/inch
2750
Puncture Resistant Load lbs
9320
Product Construction
Face Film Adhesive Release Liner
4 mil polyester Clear, Pressure-sensitive Silicone
Product Details
SOLYX UltraSafe 4Mil Our innovative 4Mil safety film is a very
special type of polyester that combines 2 mil of polyester together
with another layer of 2 mil polyester giving it a very strong form of
protection for glass in case of impact or vandalism and deters entry
by burglars. Part of its strength is not only its thickness, but it’s
extremely aggressive adhesive that molecularly bonds the film with
the glass. Included in the construction is an interior layer of ultraviolet
screening that allows for 99% rejection of damaging UV rays and on
the outer surface is one of the strongest scratch resistant coatings in
our industry. This film also brings un-tempered glass up to tempered
glass safety standards
Installation and Warranty
Installation
Installation should be in accordance with manufacturer's installation
instructions.
Warranty
This UltraSafe product will be free from defects in material and
manufacture for a period of ten (10) years from the date of
installation. See warranty information for specific details
Flammability Rating for UltraSafe Polyester films with adhesive:
When applied to surfaces- glass or plastic sheet:
Horizontal Burn (Flame Spread) ASTM D-635 inch < 1.0
UL 94 Rating UL 94 UL Classification V-O
Class A 0 -25 Flame Spread Index 0 -450 Smoke Developed Index
CODE COMPLIANCE TEST DATA
NOA 13-0408.01
Successfully passes:
CPSC 16 CFR 1201 building code.
Air Infiltration Test, per FBC, TAS 202-94
Uniform Static Air Pressure Test, Loading per: FBC, TAS 202-94 Water
Resistance Test, per FBC, TAS 202-94
Small Missile Impact Test per FBC, TAS 201-94 Cyclic Wind Pressure
Loading per FBC, ASTM E 1886
Successfully passes all weathering tests:
ASTM D1929-10, ASTM D2843-10, ASTM D635-10, ASTM G155-04a,
ASTM D638-10
Product Distribution and Contact Information
UltraSafe  Decorative Films are available through qualified Installing
Dealers, Distributors or from Decorative Films, LLC.
Samples submitted upon request.
Contact Information
Decorative Films, LLC
1-888-657-5224 www.decorativefilm.com