Owner manual

SerialGate User Guide
In Network Setting, you can set your device for preferred network environment or manage it. After
changing the settings, click the [Submit] button to save and use the Reboot from the menu to restart
the device. If you exit without saving the modified configuration, it will be lost.
If modified value is not saved by pressing the [Submit] button, the [Cancel] button can be used
to revert the value back to the previous ones.
The summary for Network Setting page is shown below.
Menu Default Description
Device
Name
SerialGate Name the device
MAC Address
Unique
Address
Display the MAC Address
Connection
Type
Static Choose whether to leave it as Static IP type or DHCP type
IP Address 192.168.0.223
Set current IP address
(If the connection type is Static IP, you can set the IP
address, but if it is set to DHCP, you cannot change the
value.)
Subnet Mask 255.255.255.0
Set current Subnet mask
(If the connection type is Static IP, you can set the subnet
mask address, but if it is set to DHCP, you cannot change
the value.)
Gateway 192.168.0.254
Set current Gateway address
(If the connection type is Static IP, you can set the gateway
address, but if it is set to DHCP, you cannot change the
value.)
DNS 168.126.63.1 IP address for DNS (Domain Name Service)
20