SerialGate SG-3011DCL/232 User Guide Version: 1.1 2013.12.
SerialGate User Guide Revision History Revision Date Document Version Pages Description Apr. 30. 2013 1.0 All Initial release Dec. 23 2013 1.1 All Revision Copyright 2013 SystemBase Co., Ltd. All rights reserved. Website http://www.sysbas.com/ Tel +82-2-855-0501 Fax +82-2-855-0580 16F Daerung Post Tower-1, 288, Digital-ro, Guro-gu, Seoul, Republic of Korea If you have any inquiries, please visit us at www.solvline.
SerialGate User Guide Index 1.
SerialGate User Guide Com Port Redirector 25 TCP_Server (TCP/IP connection from PC to SerialGate) 27 TCP_Client (TCP/IP connection from SerialGate to PC) 28 Troubleshooting 29 Product Specification 31 4
SerialGate User Guide 1. Introduction This chapter is an introduction to SG-3011DCL/232, a device server, by SystemBase. About this document This manual is shows how to user SG-3011DCL/232 to connect, communicate, configure and perform other tasks. Who should read this document? This guide is designed for SG-3011DCL/232 users and administrators. It is strongly recommended that anyone trying to apply, use, and maintain SG-3011DCL/232 to read this document.
SerialGate User Guide User Guide Contents Introduction (Chapter 1) is a preface with general information and introductory notices. Getting Started (Chapter 2) gives a brief introduction of SerialGate series, including features and applications. Hardware Descriptions (Chapter 3) explains the layout and pin specifications with block diagram and drawings. Installation (Chapter 4) helps you to connect SerialGate to serial and network environment. It ends up with first time boot-up and status check.
SerialGate User Guide SG-3011DCL/232 related documents The following table summarizes documents included in the SG-3011DCL/232 document set.
SerialGate User Guide Technical Support There are three ways you can get a technical support from SystemBase. First, visit our website http://www.sysbas.com/ or http://www.solvline.com/ and go to ‘Technical Support’ menu. There you can read FAQ and ask your own question as well. Second, you can e-mail our technical support team. The mail address is tech@sysbas.com. Any kind of inquiries, requests, and comments are welcome. Finally, you can call us at the technical support for immediate help.
SerialGate User Guide 2. Getting Started This chapter includes SerialGate overview, main and distinctive features, package contents for each product, and application fields. Overview SG-3011DCL/232 provides network connectivity to various serial devices (security devices, communication peripherals, modems, data printing devices, industrial metering devices, etc.).
SerialGate User Guide Package Contents SG-3011DCL/232 package is as follows. Please check all the contents in the box. SG-3011DCL/232, 1 unit A Class Device This device is registered only for office use, and both the seller and the user must be aware of this. If not correctly sold or purchased, please exchange with home use device.
SerialGate User Guide Application SG-3011DCL/232 can be utilized for various fields. Network Serial Communication When the PC and SG-3011DCL/232 are connected to the network, and the user gets an access to a device connected to SG-3011DCL/232 from the PC.
SerialGate User Guide Tunneling Serial Communication SG-3011DCL/232 enables a connection not restricted to distance between PC and serial device. To enable this feature, a user should change its setting to TCP Server – TCP Client mode or UDP Server – UDP Client mode referring to Chapter 5 of this manual.
SerialGate User Guide COM Port Redirection With COM Port Redirection, a user can use serial port connected to SerialGate on the network as if it is a serial port on PC.
SerialGate User Guide 3. Hardware Content This chapter provides hardware information of SerialGate including block diagram, layout, pin specification, dimensions and other hardware-related issues.
SerialGate User Guide Serial Port: RS232 (DB-9 MALE) Power Connector: 12 V DC Adapter (Inner: +, Outer: -) Reset Button: When pressed and released, SG-3011DCL/232 will reboot. LED: Operation status of SG-3011DCL/232. Next section describes the meaning of each LED display status. LAN port: 8-pin RJ45 jack connects SG-3011DCL/232 to networking devices such as Ethernet card, hub, and router.
SerialGate User Guide Serial Port Pin Description RS-232 Pin No.
SerialGate User Guide 4. Make Connection This chapter explains how to install SG-3011DCL/232. It deals with LAN and serial connection guides for SG-3011DCL/232 to operate together with the target serial device. Before connection In order to connect SG-3011DCL/232 to the network, you need to use RJ45 Ethernet port. It supports both 10Mbps and 100Mbps Ethernet connection (auto-sensing). Since LAN port in SG-3011DCL/232 supports MDIX, it automatically detects any kind of cable.
SerialGate User Guide address, SG-3011DCL/232 supports the following options in case that a user does not know IP address. Default IP Address: 192.168.0.223 The default IP address set for SG-3011DCL/232 is 192.168.0.223. To connect to this address, some changes are needed to be made from the PC. Please refer to following example.
SerialGate User Guide 5. Configure through the Web This chapter explains how to connect SG3011DCL/232 through the Web. Connection Open a web browser and type the IP address of the SG-3011PCL. A login window, shown below, will appear. The initial ID and password are “serialgate” and “99999999” without quotes. The ID and password can be modified once logged in. Network Setting After logged in, the ‘Network Setting’ page will be displayed. Every values in here except the MAC address can be modified.
SerialGate User Guide In Network Setting, you can set your device for preferred network environment or manage it. After changing the settings, click the [Submit] button to save and use the Reboot from the menu to restart the device. If you exit without saving the modified configuration, it will be lost. If modified value is not saved by pressing the [Submit] button, the [Cancel] button can be used to revert the value back to the previous ones. The summary for Network Setting page is shown below.
SerialGate User Guide Serial Setting In Serial Setting, you can set operation environment of your device. After changing the settings, click the [Submit] button to save and use the Reboot from the menu to restart the device. If you exit without saving the modified configuration, it will be lost. If modified value is not saved by pressing the [Submit] button, the [Cancel] button can be used to revert the value back to the previous ones.
SerialGate User Guide The summary for Setup menu is shown below. Menu Default Description Set protocol to be used in the serial ports Select the operation protocol that will be applied in the serial port. COM Redirector Use the serial port of SerialGate as a virtual COM port in Windows /2000/XP/2003/Vista/7/8. TCP Server SerialGate works as a socket server, waiting for the client connection on the network. Socket number for awaiting connections can be set in ‘Local socket port’ field.
SerialGate User Guide Menu Default Description Set the socket number for the port. TCP server and UDP server Local Port 4001 operation mode makes use of this port for awaiting network socket connections. Target IP Target Port 0.0.0.0 4001 In TCP Client, UDP Client mode, set the IP address of the target device. In TCP Client, UDP Client, set the port number of the target device. This needs to be set when consecutive data from the given serial port needs to be transmitted to socket at once.
SerialGate User Guide Factory Default When factory default is executed, every values set for SerialGate will be erased and go back to the outof-the-box settings. Once it is executed, the values cannot be recovered If this button is pressed for longer then 3 second, SerialGate will restore factory default settings. Pressed for Action Result Less than 3 seconds Press and hold Restarts the SerialGate 3 seconds or more then release after required Reverts all settings to the factory default values.
SerialGate User Guide 6. Application Example SerialGate can be used in many practical applications in various fields. Here we present some of them. Com Port Redirector With COM Port Redirection, a user can use serial port connected to SerialGate on the network as if it is a serial port on PC. Install COM Port Redirector and set the following steps. (For installation, please refer to Com Port Redirector manual enclosed in CD. In the picture below, IP address of SerialGate is 192.168.0.
SerialGate User Guide In order to correspond to the Redirector setting of PC, change the setting in the first serial port of SerialGate as follows.
SerialGate User Guide TCP_Server (TCP/IP connection from PC to SerialGate) In socket program from the PC, connect the first serial port of SerialGate. Since socket number for the first port of SerialGate is default 4001, try to connect to IP address and socket number 4001 in Serial Gate when connecting from the PC to the SerialGate. As shown below, change the Operation Mode to TCP_Server and confirm the socket number waiting for connection.
SerialGate User Guide TCP_Client (TCP/IP connection from SerialGate to PC) SerialGate connects to TCP/IP through the socket program in PC. Since it is a connection from SerialGate to a PC, change the Operation Mode to TCP_Client and register PC’s IP address and socket number to be connected. Check the communication speed of a serial device to be connected to serial port, and set it to Com Specification.
SerialGate User Guide Troubleshooting This section describes procedures for troubleshooting problems you may encounter with SerialGate. Troubleshooting Installation Problems If you cannot access the connected serial device via SG-3011DCL/232, first check the network connection and cabling.
SerialGate User Guide connectivity problems). If the IP address is not correct, then check whether the loading procedure was properly executed. Also verify that the host computer and SerialGate are using the same subnet masks (for example, if SG-3011DCL/232 has a subnet mask of 255.255.255.0, the host must have the same subnet mask) or that the router is properly configured to pass data between the two devices.
SerialGate User Guide Product Specification Communication LAN Port 10/100Mbps RJ-45 Port x 1EA Network Static IP, DHCP IP Number of Serial Port 1 Port Speed 150 bps ~ 921 Kbps Hardware Power 5V DC Input Dimension 46(W) x 77.5(L) x 25(H)mm Weight 32.
SerialGate User Guide Software Protocol TCP, UDP, ICMP, DHCP, HTTP Utility Redirector, TestView Configuration from Web, SGConfig Ordering Information SG-1010/232-RJ 1 x Serial RJ-45 Port (RS232 only) SG-1010/Combo-RJ 1 x Serial RJ-45 Port (RS422/RS485 selectable) SG-1010/ALL 1 x Serial DB-9 & T/B Port (RS232/RS422/RS485 selectable) SG-1010W/ALL 1 x Serial DB-9 & T/B Port (RS232/RS422/RS485 selectable) SG-1020/232-RJ 2 x Serial RJ-45 Port (RS232 only) SG-1020/Combo-RJ 2 x Serial RJ-45 Port
