User guide

Eddy User's Guide
9
Type
Feature
Eddy-CPU v 2.1 Eddy-CPU v 2.5
CPU AT91SAM9260B-CJ (210 MHz) AT91SAM9G20 (400MHz)
Memory 8MB Data Flash, 32 MB SDRAM
External I/F 19 Bit / 16 Bit Data Bus
Ethernet I/F 10/100 Base-T Auto MDI/MDIX
UARTs
4 Port, Support up to 921.6 Kbps
(1 : Full Signal, 2,3,4, : RxD, TxD, RTS, CTS only)
USB 2.0 FS 2 Host /1 Device Port, 2.0 FS (12Mbps)
ADC 4-Channel 10 Bit ADC
TWI(I2C) Master, Multi-Master and Slave Mode
SPI
8- to 16-bit Programmable Data Length
Four External Peripheral Chip Selects
GPIO Max. 56 Programmable I/O Pins
Power Input 3.3 V (200 mA Max)
Dimensions 25 x 48.5 x 6.2 mm
Hardware
Weight 8.3 g
Protocol TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP, SNMP 1&2, SSH, SSL
Ethernet 10/100Mbps MAC / PHY
Network
Network
Connection
Static IP, DHCP
O/S Linux Kernel 2.6.21
Mgt Tools SNMP, Web, PortView
Uploads TFTP, FTP, Web
Software
Dev Tools LemonIDE & SDK
Operating Temp -40 ~ 85 ℃
Storage Temp -60 ~ 150 ℃
Environmental
Humidity 5 ~ 95% Non-Condensing
Approvals
CE Class A,
FCC Class A,
RoHS
compliant
2.3 Eddy-DK v2.1 (Development Kit)
Eddy Development Kit (Eddy DK) helps programmers to test and customize their own Eddy applications easily. The
kit includes evaluation board, all necessary connectors, and programming environment with documentations and