User guide

Eddy User's Guide

ATA112233445566 ◎

ATA ◎

AT+BTSCAN ◎

AT+BTSCAN,n,to ◎

AT+BTSCAN112233445566,to ◎

AT+BTCANCEL ○

+++ ○

AT+SETESC ◎

ATO ●

ATH ●

AT+BTSEC,Auth,Encr ◎

AT+BTLAST? ○ ○

AT+BTMODEn ◎

AT+BTNAME=”Name” ◎

AT+BTKEY=”nnnn” ◎

AT+BTINFO? ○

AT+BTLPM,n ◎

AT+BTSD? ○ ○

AT+BTCSD ◎

AT+BTFP,n ◎

AT+UARTCONFIG,b,p,s,h ◎

AT+BTVER? ○ ○

AT+BTRSSI,n ●

◎ Valid only when Eddy-BT is not connected to other Bluetooth device.

● Valid only when Eddy-BT is connected to other Bluetooth device.

7.1.5 : S-Register

S-registers contain 52 parameters for the Eddy-BT. These are stored in flash memory and the values will be saved

unless hardware reset is executed. The value of S-register can be accessed and changed with ATS command. Some

S-registers not shown below are set to maximize the performance of Eddy-BT. Thus it is not recommended to

change these S-registers.

Change the value of S-register only in Standby status. Turn Eddy-BT off and on.