User guide
Eddy User's Guide
78
AT&V
Response S0:m0;S1:m1; …Sn:mn
OK
Purpose Display all the S-registers
Description All parameters are stored at S-register in flash memory. These values are sustained until
hardware reset.
Response S0:m0;S1:m1; …Sn:mn
OK
ATSnn?
Response value
OK
Purpose Display a given S-register
Parameters nn= Address of S-register
Description A specific S-register will be displayed.
ATSnn=mm
Response OK
Purpose Change S-register value
Parameters nn= Address of S-register
mm= New value of S-register
Description Some S-registers are optimized for the overall performance and protected and cannot
be changed. When users try to change these S-registers, response is ‘ERROR’.
For details of S-register, refer Appendix. B.
Example ATS10=0
Command Validity
Operation Status
AT Command
Standby Pending Connect
AT ○ ○
ATZ ○ ○
AT&F ○ ○
AT+BINQ? ◎
ATD112233445566 ◎
ATD ◎