User's Manual
7 8
Note: The following is the specification for the product. For simple reference, if you have any questions,
please contact the vendor.
Appendix
1. Display
2. Touch
3. System configuration
5. Use environment
4. Standard rating
Useenvironment
Operating temperature 0℃ ~ 45℃
Operating humidity 10% RH ~ 80% RH
Storage temperature -20℃ ~ 60℃
Storage humidity 10% RH ~80% RH
Lifetime of use 50000Hrs
TouchPanel
Touch Technology LG Incell
DrivingMethod
USB Free drive
Touch System finger or capacitance pen
OS Android
Android
Android 버전 Android 8.1
중앙처리장치 PX30
ROM 8G EMMC
RAM 1G DDR3
Rating
AC Input 110V~220V 50/60Hz
Power consumption <18W
Standby power
consumption
≤0.5W
Power supply interface Type-C
LCD
(LiquidCrystalDisplay)
Size 23” 29”
Back Light LED LED
Display Area 585.6(H) * 48.2(V) [mm] 712.8(H) * 213.7(V) [mm]
Resolution 1920 *158 1920 *540
Bright 700cd/m
2
400cd/m
2
Viewing Angle 89°（CR≥10）（typ.） 89°（CR≥10）（typ.）
Scanning Rate 60Hz 60Hz
5. Safety
FCC Part 15C
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
IC(Canada)
The Firmware Version Identification Number (FVIN) must be provided as appropriate
(if the product does not require firmware for operation, “N/A” shall be entered as FVIN)
The FVIN must be provided if applicable; “N/A” can be entered as the FVIN.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device Le présent appareil est conforme
aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Caution
This device complies with FCC radiation exposure limits for an uncontrolled
environment. Avoid operating this device at a distance less than 20cm from the user