User's Manual
▲ Note: Turn off all devices before connecting, and then power all devices after connecting.
6. Power & External device connection
Power connection
1. Connect the Type-C terminal of the adapter with the DC IN terminal
of the product.
2. Plug the power cable into the power outlet.
When power is connected, the product is automatically turned on.
Loose plugs in the adapter can cause current noise.
Don't plug in and out of the adapter repeatedly.
▲Caution:
• Adapters may vary from country to country.
• Use power cables that are suitable for the AC voltage of the power outlet in any situation, meet
the safety standards of the country/region of the material, and are accredited to the safety standards.
• Use a certified AC/DC adapter.
Warning: If the AC power cable is cut, please remove the adapter from the outlet first.
When using this product, use the following adapters:
UL certified products labeled "Class 2" or "LPS" or "PS2" with rating DC12V, 1.5A or more
External terminal description
1. Connect Micro USB to USB cable or USB HUB to Micro USB terminal
of product.
2. Connect Micro USB to USB cable or USB HUB to any device.
• Connecting a flash memory drive, keyboard, or mouse allows the product
to play video/image files on the flash memory drive.
▲ Note: Products only support video/image file forms below via Micro-USB terminals.
(VP8,H.263,H.264,MPEG1/2,MotionJPEG, MPEGAUDIO,WAVAUDIO,OGGAUDIO,FLACAUDIO,MIDIAUDIO)
7. System description
Setup
You can use the Settings menu for your product to adjust many settings for your product.
1. Select the "All Applications" button on the right side of the main screen and enter the "All Applications" menu.
Or slide upwards from the bottom of the screen.
2. Select the settings from the list of “all applications”.
5 6
Network connection
Bluetooth connection setting
System language setting
Installation application program
1. Select Bluetooth from the "set" menu;
2. Activate the Bluetooth switch;
3. Select the device you want to connect to.
Change the display language from the “Settings” menu:
1. Select the “language and input method” of the “general” menu of “set”;
2. Select a language from the menu “language and input”.
3. Drag the required language to the top of the language list or click the Add Language button using
the “adjustment bar” on the right side of the menu.
1. Select the “All Applications” button on the right side of the main screen and enter the “All Applications” menu.
Or slide from the bottom to the top.
2. Select “Explorer” from the “All Applications” menu.
3. Find the location of the program installation file in the "Explorer" menu.
Find it and then select the file.
4. Select the "install" button for the confirmation message on the screen.
The application starts installation.
5. Select the "open" button.
6. After installing the application, the application can be executed on the screen of "All Applications".
Connect the power to the product and proceed in the order below to connect to the wireless router.
1. Select the "All Applications" button on the right side of the main screen and enter the "All Applications" menu.
Or slide upwards from the bottom of the screen.
2. Select the Settings menu from the list of “All Applications”.
3. Select “WLAN” from the “set” menu.
4. Activate the WLAN switch.
5. Select the SSID of the shared device you want to connect to. To connect encrypted wireless hotspots, you must
enter a hotspot password.
6. Return to the list of “all applications”.
7. Select the Web browser application from the “All Applications” menu. Open the web page and make sure
it is connected to the wireless Internet normally.
External device connection