User Manual
Table Of Contents
- General Description
- Specification
- ②Month:Manufacturingmonth
- ③Date:Manufacturingdate
- ④Vendor:Onecharacterofmanufacturingvendor
- ⑤Linenumber:OnecharacterofManufacturingLinenumber
- ⑥Revision:Productrevisionnumber
- ⑦ZigBeeICLotNumber:Last3characters
- Operation Test
- ESL Operation by display
- Package
- Cautions for Treatment
- Usage Environment
- Storage and Use
- Battery Replacement
- How to cleaning
- //For Spray Cleaning:
- Stand Tags not to lay down tags
- Lightly spray surfaces and wait few second
- /Wipe dry using cloth or tissues.
- Dry out tags
- Note:
- When spray the tags, make sure not to flow any liquid into inside tags
- It may damage tags directly, circuit and battery.
- You can use mild, non-alcoholic detergents or glass cleaner.
- Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel
- /For Wet Tissue Cleaning:
- Lay down tags or stand tags
- Wipe using wet tissues
- Dry out tags
S-TAG Datasheet(ST-GR42003N)
REV 1.0
Solu-M
8/23
2 Specification
2.1 Product Specification
Item
Description
Size 103.5mm x 87.5mm x 14.5 mm
Battery(Life Time)
CR2450 Lithium Battery (3V)
2.4 ~ 3.3Vdc(condition : In active status)
5 years available for2updates in a day at room temperature
(The Battery Life time is dependent on the operating conditions
for ESL [temperature, etc…])
Display
Electrical paper display (active type) (84.80mm x 63.60 mm)
Display Resolution : 400 x 300 pixel
Housing Color
White
Information display Price, Unit, Symbol, Product Informationetc.
Communication Wireless communication based on IEEE 802.15.4
Communication Distance Radius 20m (Line of Sight)
Operation Temp.
0 ~ 40 °C
Storage Temp.
-25 ~ 60 °C
Humidity 35 ~ 70% RH
2.2 Radio (RF)
1
Item
Specification
Parameter
SPEC
Unit Condition
Min
Typ
Max
TX
Transmit Power
-4
2
8
dBm
Error Vector Magnitude - 10 30 % When measured for 100 chips
Tx Current
- 35 mA Total current at max Tx Power
RX Receiver Sensitivity -90 - - dBm PER < 1%
1
Test Channel : 2480MHz