User Manual
Table Of Contents
- General Description
- Specification
- ②Month:Manufacturingmonth
- ③Date:Manufacturingdate
- ④Vendor:Onecharacterofmanufacturingvendor
- ⑤Linenumber:OnecharacterofManufacturingLinenumber
- ⑥Revision:Productrevisionnumber
- ⑦ZigBeeICLotNumber:Last3characters
- Operation Test
- ESL Operation by display
- Package
- Cautions for Treatment
- Usage Environment
- Storage and Use
- Battery Replacement
- How to cleaning
- //For Spray Cleaning:
- Stand Tags not to lay down tags
- Lightly spray surfaces and wait few second
- /Wipe dry using cloth or tissues.
- Dry out tags
- Note:
- When spray the tags, make sure not to flow any liquid into inside tags
- It may damage tags directly, circuit and battery.
- You can use mild, non-alcoholic detergents or glass cleaner.
- Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel
- /For Wet Tissue Cleaning:
- Lay down tags or stand tags
- Wipe using wet tissues
- Dry out tags
S-TAG Datasheet(ST-GR42003N)
REV 1.0
Solu-M
21/23
External impact to the product, such as from being dropped, can damage the productor battery
casing can be separated.
Twisting and bending the product can damage the exterior casing and the internal components.
If this product operates abnormally in eliminating battery vinyl or replacing battery, you should
discharge it by contacting battery terminal (+) and (-).
This product uses 2.4GHz frequency band for wireless communication network. Radio
communications can be limited or affected by other applications which share same frequency band,
such as WiFi, Bluetooth, Zigbee, etc.
Frequent communications, updates and screen renewals may reduce battery life time.
6.3 Battery Replacement
Audience
Authorized persons with the following knowledge are allowed to replace the battery.
- . Battery / -. Electronic assemblies like circuit board / -. Compliance of the instruction
※ Note : If not authorized person, it will not give any warranty.
(When need to replace the battery. Please contact authorized person and get instructions.)
Instructions
- Risk of short circuit if battery is incorrectly installed/stored.
- Keep attention that your hands are dry before you start with replacement
- Keep away batteries from children and infants.
- Don’t heat, charge, bend, drop, short-circuit and disassemble battery.
- Don’t mix the used battery together with the new battery or different type of batteries.
※ Note : Battery rarely has a little stain or leak.
Steps
① Open the battery cover.
② Take out the batteries.
③ Put in the new batteries.
④ Check the batteries direction.
⑤ Put the battery cover.