User Manual
Table Of Contents
- General Description
- Specification
- ②Month:Manufacturingmonth
- ③Date:Manufacturingdate
- ④Vendor:Onecharacterofmanufacturingvendor
- ⑤Linenumber:OnecharacterofManufacturingLinenumber
- ⑥Revision:Productrevisionnumber
- ⑦ZigBeeICLotNumber:Last3characters
- Operation Test
- ESL Operation by display
- Package
- Cautions for Treatment
- Usage Environment
- Storage and Use
- Battery Replacement
- How to cleaning
- //For Spray Cleaning:
- Stand Tags not to lay down tags
- Lightly spray surfaces and wait few second
- /Wipe dry using cloth or tissues.
- Dry out tags
- Note:
- When spray the tags, make sure not to flow any liquid into inside tags
- It may damage tags directly, circuit and battery.
- You can use mild, non-alcoholic detergents or glass cleaner.
- Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel
- /For Wet Tissue Cleaning:
- Lay down tags or stand tags
- Wipe using wet tissues
- Dry out tags
S-TAG Datasheet(ST-GR42003N)
REV 1.0
Solu-M
20/23
6 Cautions for Treatment
Provisions should be made to protect against any damage to the product caused by improper handling.
It is highly recommended that the product should be installed within 3 months from the date of arrival in
the logistics hub. Recommended storage condition is in 0-40 Celsius degree, 35-70% RH environment.
This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,
therefore, may not be used for applications where safety of human lives is concerned.
6.1 Usage Environment
Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances.
Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this
RF device can affect other electronic devices and appliances.
If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.
6.2 Storage and Use
Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device
itself.
Do not place or store the product on a sloped surface. The product may slide and fall off the
surface and damaged.
Use the product in temperatures ranging from 0℃ to +40℃. Parts and circuits may be damaged if
used or stored under temperature extremes.
The display panel needs extra care when handling.
- Do not apply any impacts on outside since e-Paper display is fragile.
- Continuous exposure to excessive moisture (over 60% RH) or UV makes display
lifetimeshortened.
- Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.
Avoid areas with strong magnetism or subject to magnetism.
Contact between the device and a magnetic object can lead to malfunctions.
Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in
the vicinity of highly pressurized containers.