User Manual
Table Of Contents
- General Description
- Specification
- ②Month:Manufacturingmonth
- ③Date:Manufacturingdate
- ④Vendor:Onecharacterofmanufacturingvendor
- ⑤Linenumber:OnecharacterofManufacturingLinenumber
- ⑥Revision:Productrevisionnumber
- ⑦ZigBeeICLotNumber:Last3characters
- Operation Test
- ESL Operation by display
- Package
- Cautions for Treatment
- Usage Environment
- Storage and Use
- Battery Replacement
- How to cleaning
- //For Spray Cleaning:
- Stand Tags not to lay down tags
- Lightly spray surfaces and wait few second
- /Wipe dry using cloth or tissues.
- Dry out tags
- Note:
- When spray the tags, make sure not to flow any liquid into inside tags
- It may damage tags directly, circuit and battery.
- You can use mild, non-alcoholic detergents or glass cleaner.
- Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel
- /For Wet Tissue Cleaning:
- Lay down tags or stand tags
- Wipe using wet tissues
- Dry out tags
S-TAG Datasheet(ST-GR42003N)
REV 1.0
Solu-M
16/23
4 ESL Operation by display
It will be updated before 2
nd
release. Below is just a sample.
Display
State
User Action
STATE: 0
Initial display when shipped
from the manufacturer
(All white).
None
STATE: 1
No change.
To assign a tag using a PDA
STATE 1 2
Searching for GWs
(Tag version, MAC
addressand triangle).
Assign Process
→ Remove tape on the tag
and then Tag can start to
search the gateway
automatically w/o beeper
ZZZ
XXXXXXXXXXXX