User Manual
Table Of Contents
- General Description
- Specification
- ②Month:Manufacturingmonth
- ③Date:Manufacturingdate
- ④Vendor:Onecharacterofmanufacturingvendor
- ⑤Linenumber:OnecharacterofManufacturingLinenumber
- ⑥Revision:Productrevisionnumber
- ⑦ZigBeeICLotNumber:Last3characters
- Operation Test
- ESL Operation by display
- Package
- Cautions for Treatment
- Usage Environment
- Storage and Use
- Battery Replacement
- How to cleaning
- //For Spray Cleaning:
- Stand Tags not to lay down tags
- Lightly spray surfaces and wait few second
- /Wipe dry using cloth or tissues.
- Dry out tags
- Note:
- When spray the tags, make sure not to flow any liquid into inside tags
- It may damage tags directly, circuit and battery.
- You can use mild, non-alcoholic detergents or glass cleaner.
- Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel
- /For Wet Tissue Cleaning:
- Lay down tags or stand tags
- Wipe using wet tissues
- Dry out tags
S-TAG Datasheet(ST-GR42003N)
REV 1.0
Solu-M
14/23
3 Operation Test
Equipments : ESL Tag, Gateway, R/C
Figure 6 Operation Test
Test Scenario
① Ready to Gateway and R/C
② Wake up Tag with R/C
③ Tag start to communicate with Gateway
④ Tag display the numeric information received from Gateway
⑤ Check Tag(EPD display status & MAC address value)
⑥ Wake up Tag with R/C
⑦ Check Tag(EPD display(blank display))
Criterion (Below both two conditions should be all satisfied)
① Good :You can see ‘Black’ →‘White’ display
② Compare MAC address with that of label attached to Front or Back plane.