User's Manual

S-TAG Datasheet(ST-GR1600N)
REV 1.0
Solu-M
21/23
 E
xternal impact to the product, such as from being dropped, can damage the product or battery
casing can be separated.
 Twisting and bending the product can damage the exterior casing and the internal components.
 If this product operates abnormally in eliminating battery vinyl or replacing battery, you should
discharge it by contacting battery terminal (+) and (-).
 This product uses 2.4GHz frequency band for wireless communication network. Radio
communications can be limited or affected by other applications which share same frequency band,
such as WiFi, Bluetooth, Zigbee, etc.
 Frequent communications, updates and screen renewals may reduce battery life time.
6.3 Battery Replacement
Audience
Authorized persons with the following knowledge are allowed to replace the battery.
- . Battery / -. Electronic assemblies like circuit board / -. Compliance of the instruction
 ※ Note : If not authorized person, it will not give any warranty.
(When need to replace the battery. Please contact authorized person and get instructions.)
Instructions
- Risk of short circuit if battery is incorrectly installed/stored.
- Keep attention that your hands are dry before you start with replacement
- Keep away batteries from children and infants.
- Don’t heat, charge, bend, drop, short-circuit and disassemble battery.
- Don’t mix the used battery together with the new battery or different type of batteries.
※ Note : Battery rarely has a little stain or leak.
Steps
① Open the battery cover.
② Take out the batteries.
③ Put in the new batteries.
④ Check the batteries direction.
⑤ Put the battery cover.
■
■■
■ Battery directional
[View] Top : (+) Positive
Bottom : (-) Negative
(+)