User's Manual

12
Operation Check
< Connect Ethernet Cable with PoE or Connect SMPS adapter and Ethernet cable first . >
1) Network : ON if Ethernet link is connected
- Check every 1sec whether Ethernet link is connected.
2) 2.4GHz SIL : Blink (duration 1sec) if Server interface layer is operated.
- Check operation of Server interface layer
3) 2.4GHz TML : Blink (duration 1sec) if RF MODEM is operated.
- Check operation of RF MODEM interface layer
4) Sub GHz SIL : Blink (duration 1sec) if Server interface layer is operated.
- Check operation of Server interface layer
5) Sub GHz TML : Blink (duration 1sec) if RF MODEM layer is operated.
- Check operation of RF MODEM interface layer
1) Network LED
2) 2.4G SIL LED
3) 2.4G TML LED
4) SubG SIL LED
5) SubG TML LED