Solu-M ESL Gateway User Manual (SLG-EP101S) 1
Document Summary Author: ICT Development Team, ICT Division Distributor: Solu-M Co., Ltd. Tel.: 031-8006-7650 www.solu-m.com Editor Information - Tel.: +82-31-8006-7650 - Address : A-6th floor, 357, Guseong-ro, Giheung-gu, Yongin-si, Gyeonggi-do Copyright Notification Solu-M Co., Ltd. Copyright @2020 Solu-M Co., Ltd. All trademarks used are properties of their respective owners. The content of this document is subject to change without prior notice.
Revision History Rev. 1.0 Date 02.10.2020 Remark First Edition.
Contents 1. Precautions .............................................................................................................................. 5 2. Overview ................................................................................................................................... 6 3. Product Specifications ...................................................................................................... 7 3.1 General Specifications ......................................................
1. Precautions “This RF device operates on the 2.4GHz and Sub-GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned.” 1) Usage Environment Take extra caution when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances.
2. Overview Gateway make up a system the electronically displays price and other product information that are traditionally shown printed or written on paper in places like the supermarket. Here, ESL(Electronic Shelf Label) Gateway receives product price updates from the server and uploads the new data to the applicable electronic shelf label tags (ESL-Tag), changing the displayed price information.
3. Product Specifications 3.1 General Specifications 3.1.1. Gateway General Ethernet (10/100/1000Mbps) Communication Wireless (2.4GHz and Sub-GHz frequency) Dimension (W*H*D) 243 * 243 * 46 (mm) Weight (g) 650g Enclosure Plastic (ABS) PoE (Power over Ethernet(IEEE802.3af)) Power or AUX.
3. 2 RF Specifications 3.2.1 Gateway Category Specification Note External Antenna 2EA Internal Antenna 1EA Antenna Type 2.4GHz RF Frequency Band (Tx, Rx) 2402MHz ~ 2480MHz Antenna gain External : 3.4 dBi Internal : 3.2 dBi Peak gain Antenna Type External Antenna 2EA ▷Korea-KC : 917~923.5 MHz Sub-GHz RF Frequency Band (Tx, Rx) ▷FCC,Canadian : 902~928 MHz ▷Europe-CE : 863~868 MHz Antenna gain Operating Temperature Power 4.7 dBi Peak gain 0℃ to +40℃ █ PoE (Power over Ethernet (IEEE802.
4. Product Description 4-1 Exterior 4.1.
5. Product Installation 5-1 Gateway - Components (includes installation accessories – bracket, screws) Installation a) Drill 4 holes on the wall or ceiling to align with Plates (1). Refer to the attached diagram. b) Drill two Ф10 holes on the wall or ceiling for Ethernet Cable. Refer to the attached diagram. c) Align the mounting bracket holes(4) to the holes drilled through the wall or ceiling from step a) d) SMPS Adapter and Ethernet Cable through the two Ф10 holes made from step b).
f) Sliding gateway (5) into mounting bracket.
Operation Check 1) 2) 3) 4) 5) Network LED 2.4G SIL LED 2.4G TML LED SubG SIL LED SubG TML LED < Connect Ethernet Cable with PoE or Connect SMPS adapter and Ethernet cable first . > 1) Network : ON if Ethernet link is connected - Check every 1sec whether Ethernet link is connected. 2) 2.4GHz SIL : Blink (duration 1sec) if Server interface layer is operated. - Check operation of Server interface layer 3) 2.4GHz TML : Blink (duration 1sec) if RF MODEM is operated.
.Installation a) Map product information and tag IDs. Each tag has a unique 1) MAC Address that serves as the tag’s ID. Map 1) MAC Addresses of the tags and 2) barcodes of the products. Using a PDA f or higher as the operating system and a barcode scanner, scan the tag’s 1) MAC Address and then the product’s barcode to map. (1) MAC Address (2) Product Barcode + (3) Industrial PDA b) Register product and tag mapping information. Using the PDA’s WLAN feature, register mapping data with the 4) Server.
(4) Server c) Attach a back rail to the shelf (secure using double-sided tape or screws). d) Attach end and middle caps to the middle rail. e) Take a tag that has been mapped from step a) and insert to the middle rail from step d). Here, make sure to align the tag and the rail grooves properly. f) Slide in the middle rail to the fixed back rail.
WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules.
