User's Manual

CONFIDENTIAL
SoluM ESL Gateway User Manual
REV 1.0 SoluM 10/13
4.2 Status Check
After the Gateway is powered on by plugging in either anEthernet Cable with PoE ora SMPS Power
Adapter (with an Ethernet Cable), LED status lights will turn on or blink depending on the current state.
1
Network
 ON if Ethernet link is connected
 GW checks every1sec. whether Ethernet link is connected.
2
2.4GHz SIL
 Blinks (1 sec. duration) if the Server interface layer is operational.
 GW checks the operation of the Server interface layer
3
2.4GHz TML
 Blinks (3sec.duration) if the RF MODEM is operational.
 GW checks the operation of the RF MODEM interface layer
4
Sub GHz SIL
 Blinks (1sec.duration) if the Server interface layer is operational.
 GW checksthe operation of the Server interface layer
5
Sub GHz TML
 Blinks (wakeup order duration) if the RF MODEM layer is operational.
 GW checks the operation of the RF MODEM interface layer
1) Network LED
2) 2.4G SIL LED
3) 2.4G TML LED
4) SubG SIL LED
5) SubG TML LED
Figure 4.2. Gateway LED