Data Sheet
Table Of Contents
- 1 General Description
- 2 Specification
- 3 Operation Test
- 4 ESL Operation by display
- Package
- 6 Cautions for Treatment
- 6.1 Usage Environment
- 6.2 Storage and Use
- 6.3 Battery Replacement
- 6.4 How to cleaning
- Note:
- When spray the tags, make sure not to flow any liquid into inside tags
- It may damage tags directly, circuit and battery.
- You can use mild, non-alcoholic detergents or glass cleaner.
- Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel
- For Wet Tissue Cleaning:
S-TAG Datasheet(EL027C2)
REV 1.0
Solu-M
13/23
3 Operation Test
Equipments : ESL Tag, Gateway, R/C
Figure 6 Operation Test
Test Scenario
① Ready to Gateway and R/C
② Wake up Tag with R/C
③ Tag start to communicate with Gateway
④ Tag display the numeric information received from Gateway
⑤ Check Tag(EPD display status & MAC address value)
⑥ Wake up Tag with R/C
⑦ Check Tag(EPD display(blank display))
Criterion (Below both two conditions should be all satisfied)
① Good :You can see ‘Black’ →‘White’ display
② Compare MAC address with that of label attached to Front or Back plane.