Installation Guide

06 07
04 Remote Control
MOTION SENSOR MODES
A
Light on 100% if motion is detected, stand-by period is
60 seconds. Light will turn off when no motion is detected.
B
Light on 100% if motion is detected, stand-by period is 60
seconds. Light will dim down to 5% output when no motion
is detected.
60s 60s
C
Light on 100% if motion is detected, stand-by period is
120 seconds. Light will turn off when no motion is detected.
120s
50% 2hr 20% 6hr 10% till dawn
RST
Light on 50% for 2 hours, then dims down to 20% for 6 hours,
then dims down to 10% untill dawn (Sensor disabled).
E
Light on 50% for 3 hours (Sensor disabled), then returns to
motion sensor mode. If motion detected, stand-by period is 60
seconds. Light will turn off when no motion is detected.
3hr 60s
F
Light on 50% for 3 hours (Sensor disabled), then returns to
motion sensor mode. If motion detected, stand-by period is 60
seconds. Light will dim down to 5% output when no motion is
detected.
3hr 60s
D
Light on 100% if motion is detected, stand-by period is 120
seconds. Light will dim down to 5% output when no motion
is detected.
120s
Additonal Notes
1. The flood lights “Turn On” time depends on the client’s local time
(Turn-on Light Level:< 20Lux).
2. A, B, C, D, E and F modes have memory functions. For example, if you
press mode A and then press the OFF button, Mode A will still be activated
when you turn the light on again until end user resets the mode.
REMOTE CONTROL INSTRUCTIONS
Remote Buttons
A Red
B Green
C Red+Green
D Blue
E Blue+Red
F Blue+Green
Indicator Status
Indicator Status Power Status