Instruction Manual

21 UM0039_Ai-LB 5k_EN_V01_0223
3. Pass the communication cable through the RJ45 wiring cover.
4. Plug the communication cable to the corresponding RJ45 port.
5. Tighten RJ45 wiring cover.
6. Connect the other end of the communication cable to the inverter refer to Fig. 4.1.1.
Fig. 4.3.4 Communication cable connection
Step3. Power cable connection
Procedure:
1. Make sure the breaker is off.
2. Plug the quick plug end of the power cable into the corresponding socket.
Fig. 4.3.5 Power cable connection
Additional:Quick Plug Crimp Guide
(1) Material List
Plug Isolation Cap Tail-hood
(2) Put wire through isolation cap and Tail-Hood.