User's Manual

5 Unfolding/Folding/Carrying
13
4 Assembly Guide
（Refer toUnfolding Operations）
1.Unfold the scooter and put the kickstand down. 2.Pull the spring to bring out the lower main line
connector.
3.Connect the main line and attach the handlebar
to the stem.
12
4.Tighten the screws with the tools included in
the package and press the power button to
check if it works normally.
Pull the lock catch upwards.
Pull the folding handle downwards.
a. Pull out the spring from the
stem before installation;
b. Pull the spring up to 7-10cm
to bring out the lower main line
connector;
c. Do not touch the main line
interface during the pulling
process.
Strictly follow the arrow
marks to align the slots
and install the handlebar,
and make sure that the
spring is put back to its
original position after the
wiring is completed.
Use the tool included in
the package
to tighten the screws.
Check the power button
after the completion of
assembly.
3.Lift the head of the scooter. 4.Close the folding handle upwards.
1.Push up the shackle. 2.Pull the folding handle downwards and outwards.