User's Manual

18
19
Short press the Power switch for 1 second to turn on the scooter, and long press the Power switch for 3 seconds to turn it off.
Press the power button twice quickly to switch the gear. The gear can be set to Level 1 (max. 6 km/h，The
pedestrian mode), Level 2 (max. 16 km/h), and Level 3 (max. 25 km/h).
After switching on the scooter, click the LED headlight switch to turn it on.
Power Switch
Gear Setting
LED Headlight Switch
Hold the left brake lever to brake. The greater the holding force, the greater the braking force. The indicator will
blinkinng under the condition of braking.
When riding the scooter at a speed faster than 3km/h (1.86 mph), the throttle will get started and take effect. By
pressing the throttle, the user can control the riding speed. (Speed Range: 1-25km/h / 0.62-15.53 mph)
Speed control
Brake control
Tyre pressure
Emergency Braking
Noise emission
The A-weighted emission sound pressure level of the vehicle in operation is less than 70 dB(A).
When encountering an emergency, step on the rear brake with your foot. At this time, the rear wheel friction brake and
the front wheel electromagnetic brake can work at the same time. Under normal circumstances, do not use emergency
braking vigorously during high-speed driving, so as to avoid the riding risk or damage to the rear wheel. The company is
not responsible for the damage.
Before riding, please make sure the tyre pressure is no less than 2.8KPA. Otherwise, the mileage will decrease
each time. The tyre pressure may also be under the standard value, if the scooter is unused for a long time.
(This is applicable for the scooters equipped with pneumatic tires.）
Cruise control
The scooter is not initially configured with the cruise control speed. If necessary, open the mini program and
select the cruise control speed. When the scooter is running at the constant cruise control speed, the cruise
control will be enabled. After the cruise control is enabled, you can release the thumb accelerator, and the
scooter will automatically run forwards at a constant speed. Hold the left brake lever to disable the cruise
control. When the speed of the scooter reaches the set cruise control speed, the cruise control will be enabled
again.
You can set the status of no cruise in the mini program to disable the cruise control function.
LED Display
T1
Headlight
Alert
Cruise
Control
Wireless
Connection
T2 T3 T4
T5
T6
T7
T8
M1 M2 M3 M4 M5
Real-Time Speed
Speed Unit
Gear 2
Gear 1
Battery Indicator
Total Mileage
Gear 3
The pedestrian mode