Instructions / Assembly

9404527 - 02/19/2013 [e-mail]
Bolt Protrudes
Bolt
Nut
x
Bolt is Flush
Nut
Attach Glider Hanger to Swing Assembly
Other Parts
Hardware
5/16” Flat
Washer
Glider Hangers
5/16”
Lock Nut
G7
x 2 per
Hanger
2 x Glider Hangers
4 x 5/16 x 5-1/2” Hex Bolt
(5/16” at washer x 2, 5/16” lock nut)
G7
Three-Position
Swing Beam
Bottom View
Top View
Insert exible Swing Hanger Cover over hook. (g. 1.1)
Slide Swing Hanger Cover around hook until at top. (g. 1.2)
Hook each glider chain onto hook. (g. 1.3)
Twist and ex Swing Hanger Cover onto open end of hook. (g. 1.4)
Bolt Protrudes
Bolt
Nut
x
Bolt is Flush
Nut
Fig. 1.2
Fig. 1.3 Fig. 1.4
Fig. 1.1
Attach 2 Glider Hangers to the Three-Position Swing Beam Assembly using the 2 (GL7) 5/16 x 5-1/2” Hex Bolts (with 2 at
washers & lock nut) Per Glider Hanger.