User Manual

i
!
IMPORTANT
Setting up the SOLOSHOT Tripod
4
i
i
Tag Preference: Auto Track Tag Preference: Ask To Track Registration
Location and Tripod Setup
When the Tag is turned on and within
range of the Base, the Base will
automatically track this Tag.
This is the default setting.
When the Tag is turned on and within
range of the Base, the Tag will need to
be toggled on within the Tag Manager.
Tags that are toggled off will not be
tracked by the Base.
Finish setup by updating and registering
your Base, Tag(s) and Camera to your
SOLOSHOT account, created in Step 1.
To ensure the best filming results:
Level your SOLOSHOT3 using the
bubble level on the Tripod.
Ensure that both the Base and Tag
always have a clear view of the
sky.
Do not bring the Tag and/or Base
inside once powered on.
Do not setup under an overhang,
dense tree canopy, or close to a
building or cliffs.
Open and set up the Tripod by unlocking the Leg Locks
(a) and extending the telescoping legs until the Tripod is
at the desired height.
Lock the Leg Locks.
In windy or otherwise unstable conditions, be sure to
widen the leg stance using the Wide Leg Locks (b).
Tripod Neck Extension:
Extend the Tripod Neck by loosening the Neck Thumb
Screw (c). Tighten Neck Thumb Screw and Leg Locks
when desired height is achieved.
Wide Leg Lock Option:
Use a wider stance if necessary to improve stability or to
account for local topography. For example, in windy or
unstable conditions, or in areas where the Tripod may be
bumped or jostled, you should use a wider stance.
Windy Conditions:
Add a weight to the hook on the bottom of the Tripod
neck and/or widen the leg stance, as outlined above.
a
c
b
USER MANUAL 05 SOLOSHOT.COM
Preparing your SOLOSHOT3
Update and Registration
Continued from previous page