User Manual

i
Overview
2
Updating
2
Check For Updates
1
Power Off
3
Dock the Tag
2
Power On In Update Mode
Tag Update Mode
Update App
SOLOSHOT3 and its components will
continually improve over time with
frequent software updates.
Updates contain performance
improvements, new features, and bug
fixes just like software updates on
your smartphone or computer.
If an update is available, you can view
the change log and/or begin the update
by tapping “Update.” Follow the
on-screen instructions to update the
Base, Tag, and Camera.
If no updates are available, then tap
DONE to return to the home screen.
In the home screen, select the UPDATE
APP.
The system will automatically check
for available update.
The Tag must be placed in Update
mode before updating the software.
Power off the Tag by holding down the
Power button for 2 seconds, until the
screen turns off.
Dock the Tag into the accessory port on
the front of the Base.
Follow the onscreen instructions and
continue with the update process.
While holding down the button,
press the power button.
The Tag will turn on and the OLED will
display a graphic indicating that it
needs to be docked to the Base.
USER MANUAL 20 SOLOSHOT.COM