Quick start Guide

1 32
1 32
Dock the Tag, with buttons facing up,
into the Accessory Port on the front of
the Base.
Attach the Tag to the Base by first
inserting from the top, as depicted in
the graphic below.
Insert the Mini USB Charging Cord into
a USB outlet adapter (not included) and
plug it into the Base.
1.5A to 2.1A outlet adapter is required.
(most tablet charger adapters)
For the best results, we recommend
mounting the Base on a Tripod with a
3/8” mounting screw.
If you already have a pan/tilt head on
your tripod, please remove it prior to
connecting your Base.
If your tripod only has a ¼” screw, use
the provided Tripod Adapter Screw.
Fully charge the Base and Tag prior to
use. This will take about 4 hours.
Charging time varies based on USB
wall adapter rating.
Connecting the Base to your Tripod
Hand tighten the Base onto your tripod
until you feel light resistance from the
panning motor. Avoid excessive
manual panning and tilting of the Base
motors by hand.
Use the provided Tripod Tool to finish
tightening.
USER MANUAL 03 SOLOSHOT.COM
Charging the Base and Tag
Getting Started
Docking the Tag Charging Cord & Adapter
Tripod Adapter Screw Connecting Using the Tripod Tool
Charging Time
i
!
For the best experience, use a sturdy
tripod. Visit soloshot.com to purchase a
recommended tripod.
IMPORTANT
INFO
Only the Base & Tag contain batteries
and must be recharged.