User's Guide

Brama S-C / S-A1 User Guide
© Interlink-U, 2021 Page 16 of 26
Figure 7: Brama Device Incapacitation Alarm activation
Incapacitation detection is always disabled when the unit is on charge or switched off.
When there is a minute left on your
timer the device will enter an Alert-
Expiry phase during which it notifies
you (as highlighted, and by vibrating 4
times) of imminent timer expiry.
When the Timer expires (or is
ended/cancelled) the device will give
2 long vibrations, and the Timer icon
will disappear.
The Incapacitation Alarm is cancelled
by sliding the Incapacitation slider
(as shown) back to the left.
You can also manually activate an
Incapacitation Alarm by sliding the
Incapacitation slider (as shown) to
the right.
If your device recognizes
Incapacitation while the Timer is
active, it will raise an Alert into our
ARC, when an operator will begin
attempting to establish the degree of
assistance you require.