User's Guide

Brama ID Touch User Guide
© Interlink-U, 2021 Page 4 of 26
2.2.4 Incapacitation Alarm
This function can automatically initiate an alarm if your Brama Device detects you have become
incapacitated.
The Incapacitation Alarm is not active by default. An Brama Device user determines when, (and for
how long) incapacitation detection is enabled. Once the specified time elapses, incapacitation
detection is inactive once more.
2.2.5 Risk Messaging
The Risk Messaging functionality on Brama Device allows a lone worker to be notified of
useful or pertinent information based on their location.
The function can be enabled automatically by pre-defined message settings which are linked
to the breaching of a Geofence. For customers, this is driven by a pre-defined schedule in
the software management platform to reflect a worker’s calendar or delivered directly by a
lone worker’s manager – again through the software management platform.
2.2.6 GNSS (Global Navigation Satellite System)
This function can assist the ARC in the event of a Red Alert and is used in conjunction with your
Status Check Voice message to assist in determining your Location.
2.2.7 Rip Pin
This function allows a lanyard to be connected to the device. In the event that the lanyard is
removed, a Red Alert is automatically raised.