User Manual

Users ManualUsers Manual

8. Preamble: The preamble type can be set as long, short

or auto for the PLCP within the physical layer,

default is Auto

9. Tx Power Level: You may adjust the transmission power

level from 5󲕏100 dBm

10. Fragmentation Threshold: You may choose to divide frame

in Tx, it is more efficient if the frame is

divided because only the failed frames need to

be re-transmitted. It is suitable to be used

when the S/N ratio is low

11. RTS/CTS Threshold: When the frame is smaller than the

RTS/CTS Threshold, when WLAN dongle will

transmit the frame is idled channels, if not,

WLAN dongle will transmit the frame with the

standard 802.11b protocol, this will include

RTS and CTS frames and headers, it will take

longer time to identify each other's signaling,

but it can avoid collisions

12. Power Saving: This can be set into power save mode,

default is off