User's Manual Part 2

Users ManualUsers Manual

To switch in between GPRS and WLAN

There is a switch on the bottom side of the USB GPRS/WLAN

dongle. GPRS is enabled when switched to G and WLAN is

enabled when switched to W. You may observe the status by the

indicate light on the front panel, upper 7 color LED is for GPRS

and the lower single color LED is for WLAN.

Note:

USB GPRS/WLAN dongle's factory setting is set to (

WLAN is enabled when switched to (W)

GPRS is enabled when switched to (G)