Installation Guide

17
TROUBLESHOOTING GUIDE
You can solve many common wine / beverage cooler problems easily, saving you the cost of a possible warranty
inquiry. Try the suggestions below to see if you can solve the problem before calling us.
PROBLEM POSSIBLE CAUSE SOLUTION
chiller does not
operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown
fuse.
Plug the unit.
Press power button to turn on the unit.
Check the breaker and/or fuses.
chiller is not cold
enough.
External environment may require a
higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Check the temperature control setting.
Close the door properly.
Check the door gasket.
The compressor turns
on and off frequently.
The room temperature is hotter than
normal.
Many contents has been added to the
chiller.
The door is opened too often.
The door is not closed completely.
The temperature control is not set
correctly.
The door gasket does not seal properly.
Close the door properly.
Check the door gasket.
The light does not
work.
Not plugged in.
The circuit breaker tripped or a blown
fuse.
The light button is “OFF”.
Plug the unit.
Check the breaker and/or fuses.
Vibrations. The chiller is not leveled.
The bottles are vibrating.
There is an object under the chiller.
Check to assure that the chiller is
level.
Make sure the bottles don’t touch
each other.
Remove the object.