Installation Guide

11
CARE AND MAINTENANCE
Moving your wine / beverage cooler
-Remove all items (bottles)
-Tape down securely all loose items (shelves) inside your appliance.
-Turn the adjustable leg up to the base to avoid damage.
-Tape the door shut. Be sure the appliance stays secure in the upright position during transportation. If you
absolutely need to transport the chiller horizontally, transport the chiller on its back (door on top). Also protect
outside of appliance with a blanket, or similar item.
Energy saving tip
The wine cooler should be in the coolest area of the room, away from heat producing appliances, and out of the
direct sunlight
Cleaning your wine / beverage coolers
Turn off the power, unplug the appliance, and remove all items including shelves. Wash the inside surfaces with
warm water and a baking soda solution. The solution should be about 2 tablespoons of baking soda to 1 cup of
water.
Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning
area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and a mild liquid detergent. Rinse well and wipe dry with a clean, soft
cloth. Do not use steel wool or a steel brush on the stainless steel. These will scratch the stainless steel,
allowing contaminants into the metal composition, potentially causing rusting (depending on occurrence and
scratch depth).