Installation Guide

Installing the stainless-steel handle

Your wine / beverage cooler includes a stainless-steel handle. To install the handle please follow the below

instructions:

1. Pull away the door gasket in the area where the handle is to be installed on the left side as shown below in

Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.

2. Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver until the

handle sets both flush and secured tightly against the door frame. (DO NOT over tighten as this will cause

damage to the handle assembly).

3. Replace the door gasket to its original position.

Illustration # 1

WARNING:

●

If the appliance is power off suddenly. Please turn on the appliance after 3-5 minutes later. The

temperature setting is with automatic memory function.

● If it is the first time you are using your wine cooler, it is normal that the pre-set temperature and display

temperatures are different.