Certifications 2

Safety Data Sheet in Accordance with regulation 2015/830 Page 3 of 6
Trade Name: WS Chlor Test
Company / Supplier: Söll GmbH, Fuhrmannstr. 6, D- 95030 Hof
Telephone: +49 - 9281-72850, Date of issue: 10.11.2017 Replaces Data Sheet of: 20.11.2015
SECTION 6: Accidental release measures
6.1
Personal precautions, protective equipment and emergency procedures
See chapter 8.2.2
6.2
Environmental precautions
Do not contaminate surface water. Do not allow material to contaminate ground water system.
6.3
Methods and material for containment and cleaning up
Sweep up or vacuum up spillage and collect in suitable container for disposal.
After cleaning, flush away traces with water.
6.4
Reference to other sections
None.
SECTION 7: Handling and storage
7.1
Precautions for safe handling
7.1.1
Precautions for Safe Handling:
Avoid contact with the skin and the eyes.
When using, do not eat, drink or smoke.
Remove and wash contaminated clothing before re-use.
Wash hands before breaks and at the end of workday.
Do not breathe dust.
Handle in accordance with good industrial hygiene and safety practice.
7.1.2
Precautions in Case of Fire and Explosion:
Normal measures for preventive fire protection.
7.2
Conditions for safe storage, including any incompatibilities
7.2.1
Storage Instructions:
No special precautions required.
7.2.2
Store away from:
Do not store together with oxidizing agents.
7.2.3
Further Information on Storage Conditions:
No conditions to be specially mentioned.
7.3
Specific end use(s)
n.av.
SECTION 8: Exposure controls/personal protection
8.1
Control parameters
Material Limit Value
8.2
Exposure controls
8.2.1
Appropriate engineering controls
Ensure adequate ventilation.
8.2.2
Individual protection measures
8.2.2a
Respiratory Protection:
Not required under normal use.
8.2.2b
*
Hand Protection:
Repeated or prolonged exposure: Protective gloves complying with EN 374.
The choice of an appropriate glove does not only depend on its material but
also on other quality features and is different from one producer to the other.
Please observe the instructions regarding permeability and breakthrough time
which are provided by the supplier of the gloves. Also take into consideration the
specific local conditions under which the product is used, such as the danger of
cuts, abrasion, and the contact time.
8.2.2c*
Eye Protection:
If splashes are likely to occur, wear: safety glasses
8.2.2d
Skin Protection:
No.
8.2.2e
Further Information:
Observe wearing time limits:
8.2.3
Environmental exposure controls:
n.av.