Installation Guide

WWW.SOLISTONE.COM
cement adhesive should be used as a minimum. A 1/8” notch trowel is recommended for
most applications. To make sure there is 100% coverage you can firmly press the tiles into
place, but do not use any hard objects to tap down the center or edges of the tile.
GROUTING
Important: SOLISTONE recommends non-sanded grout for most installations of the Aluminum
tiles. Installation professionals may select non-sanded grouts containing a latex additive.
Different types of epoxy or gel based grouts may also be used and will prevent excessive
scratching caused during the installation process.
Grout should be designed for external or internal conditions which ever may be the case.
Sanded grout is generally recommended for any grout joint larger than 1/8”. For optimum
results, we recommend the repetitive use of a firm sponge. A sanded grout, if applied
harshly, can scratch the tiles; carefully float in the grout to avoid abrasion.
SEALANTS
Although Aluminum tiles do not require sealant, it is recommended that some type of sealant
be used in order to protect grout joints.
CARE & CLEANING
Aluminum tiles must be regularly cleaned and maintained to extend their life and beauty.
Most dirt and stains can be cleaned with a mild detergent and soft cloth or sponge.
Fingerprints, streaks and watermarks can be removed with olive oil. When using cleaner,
avoid direct contact with grout as it may discolor. Do not use abrasive cleaners, powders,
scouring pads, steel wool or sandpaper. Do not let soap, bleach or other cleaning solutions
set on the surface.