User Manual

125124
THE CONTAINER WILL NOT VACUUM
1. Check whether the air extraction hose is securely attached to the lid of the con-
tainer and the air-extraction opening on the appliance.
2. Press down on the lid or the hose connection to ensure that the container is
airtight.
3. If the container or the adaptor is visibly damaged, change the container or
adaptor. Make sure that the container lid is tight all around.
4. If fluid leaks from the container during vacuuming, the container and it’s con-
tents should first be cooled in the fridge.
5. Check the functioning of the appliance.
6. Check that the edge of the container and the lid are completely dry and that
there is 3 cm distance between the food and the top edge of the container.
If none of these suggestions apply, please contact Solis or a Solis approved service
station.
THE HEXAGONAL CONTAINER IS NOT MAINTAINING
A VACUUM
1. Check that control dial is at the “SEAL” position, before, during and after
vacuuming.
2. Check that the rubber seal is sitting correctly and is undamaged.
THE SQUARE CONTAINER IS NOT MAINTAINING
A VACUUM
Check that the rubber seal is sitting correctly and is undamaged.
ACCESSORIES:
Item-No Item
922.52
922.51
922.50
Vacuum films
2 rolls 15 x 600 cm
2 rolls 20 x 600 cm
2 rolls 30 x 600 cm
922.61
922.64
Vacuum bags
50 bags 20 x 30 cm
50 bags 30 x 40 cm
922.79
Square container
2 piece set
1‘000 ml / 2‘800 ml
922.78
Hexagonal container
3 piece set
700 ml / 1‘400 ml / 2‘000 ml
You can purchase accessories for your vacuum appliance in good stores
or from Solis of Switzerland Ltd.
Phone: [phone], Fax: [phone],
www.solis-onlineshop.ch (shipping only within Switzerland).